Monday, September 19th, 2016 |
||
| 8:30 – 9:00 Venue: H 36 |
Opening Ceremony | |
| 9:00 – 9:45 Plenary lecture I Venue: H 36 |
Combinatorial Design of Textured Mechanical Metamaterials Corentin Coulais1,2, Eial Teomy3, Koen de Reus1, Yair Shokef3, and Martin van Hecke1,2 1Huygens-Kamerlingh Onnes Lab, Universiteit Leiden, Leiden, The Netherlands 2FOM Institute AMOLF, Amsterdam, The Netherlands 3School of Mechanical Engineering and The Sackler Center for Computational Molecular and Materials Science, Tel Aviv University, Tel Aviv, Israel Chair: Omer Van Der Biest |
|
| 9:45 – 10:15 | Coffee break | |
| Manufacturing and Properties Assessment of Functionally Graded Materials and Structures I Venue: S 130 Session Chair: Igor Konyashin |
Modelling of Functionally Graded Structures and Materials and Structures I Venue: S 135 Session Chair: Siegfried Schmauder |
|
| 10:15 – 10:50 | Functionally graded WC-Co cemented carbides: The state of the art (Keynote) I. Konyashin1,2, S. Hlawatschek1, B. Ries1, E. Levashov2, A. Zaitsev2 1Element Six GmbH, Burghaun, Germany 2National University of Science and Technology MISiS, Moscow, Russia |
Modeling of thermomechanical fracture of functionally graded coatings (Keynote) V. Petrova1,2, S. Schmauder1 1University of Stuttgart, Germany 2Voronezh State University, Voronezh, Russia |
| 10:50 – 11:15 | Preparation and Properties of Nd-Substituted Bismuth Titanate Films with Gradient Composition C. B. Wang, D. Y. Guo, C. Y. Liu, Q. Shen, L. M. Zhang State Key Lab of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan, China |
Stress and vibration analysis of FG plate with in-plane material properties variation Maedeh Amirpour1, Simon Bickerton1, Raj Das1, Brian Mace2 1Center of Advanced Composite Materials (CACM), Department of Mechanical Engineering, University of Auckland, New Zealand 2Department of Mechanical Engineering, University of Auckland, New Zealand |
| 11:15 – 11:40 |
Functionally graded diamond-containing composite materials: Manufacture, properties, performance D. Sidorenko, E. Levashov, P. Loginov, N. Shvyndina, E. Skryleva National University of Science and technology MISiS, Moscow, Russia. |
Investigation on the Ballistic Limit of Functionally Graded Plates Recep Gunes1, Mevlut Hakan2, M. Kemal Apalak3, J. N. Reddy4 1,2,3Department of Mechanical Engineering, Erciyes University, Kayseri, Turkey 4Department of Mechanical Engineering, Texas A&M University, College Station, USA |
| 11:40 – 12:05 |
Mechanical characterization of feldspathic porcelain-zirconia composites Bruno Henriques1,2, Santos, R. L.P 3, Nascimento, R. M.3, Julio C.M. Souza4, Filipe Silva2 1Ceramic and Composite Materials Research Group (CERMAT), Federal University of Santa Catarina (UFSC), Campus Trindade, Florianópolis/SC, Brazil 2CMEMS-UMinho, University of Minho, Campus de Azurém, Guimarães, Portugal 3Department of Materials Engineering, Federal University of Rio Grande do Norte (UFRN), Campus Lagoa Nova, Natal, Brazil 4CEPID, Department of Dentistry (DODT), Universidade Federal de Santa Catarina (UFSC), Florianópolis/SC, Brazil |
The Contact Problem of a Rigid Punch Sliding over a Functionally Graded Bilayer Isa Comez1, Mehmet Ali Guler2 1Department of Civil Engineering, Karadeniz Technical University, Trabzon, Turkey, 2Department of Mechanical Engineering, TOBB University of Economics and Technology, Ankara, Turkey |
| 12:05 – 12:30 |
Fabrication and Application of Mg-Cu Graded-Density Impactors from Powder Processing for Accurately Controlled Complex Loading Paths in Light-gas Gun Guoqiang Luo1, Jiayu He1, Lianmeng Zhang1, Xiaozhuang Zhou1, Qiang Shen1, Meijuan Li1, 1State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan, China 2Laboratory of Shock Wave and Detonation Physics Research, Institute of Fluid Physics, Mianyang, Sichuan, China |
Geometrically nonlinear free vibration of clamped-clamped functionally graded beam with an edge crack Chajdi Mohcine, Merrimi El Bekkaye, El Bikri Khalid Mohammed V University in Rabat. ENSET – Rabat, LaMIPI. Rabat, Morocco |
| 12:30 – 13:30 | Lunch break | |
| 13:30 -14:15 Plenary lecture II Venue: H 36 |
Challenges in multiscale materials modelling for FGMs Siegfried Schmauder Institute for Materials Testing, Materials Science and Strength of Materials (IMWF) University of Stuttgart, Stuttgart, Germany Chair: Omer Van Der Biest |
|
| Structure Dominated Biomaterials I Venue: S 130 |
Porous and Ordered Structures Venue: S 135 Session Chair: Vladimir Sanin |
|
| 14:20 – 14:55 | Titania Surface Layer Can Prevent Adhesion of Bacteria to Titanium Implants (Keynote) Martina Lorenzetti1, David Stopar2, Saša Novak1 1Jozef Stefan Institute, Department for Nanostructured Materials, Ljubljana, Slovenia 2Biotechnical Faculty, University of Ljubljana, Ljubljana, Slovenia |
Soft Porous Materials for Acoustics (Keynote) A. Kovalenko1, S. Raffy1,2, T. Brunet3, J. Leng2, and Olivier Mondain-Monval1 1University of Bordeaux, Centre de Recherche Paul Pascal CNRS, Pessac, France 2University of Bordeaux, Laboratory of the Future CNRS-Solvay, Pessac, France 3University of Bordeaux, Institut de Mécanique et d’Ingénierie CNRS-INPB, Talence, France |
| 14:55 – 15:20 | Functionally Graded Ceramic Implant Materials for Joint Endoprotheses – Experiences and Outlook Claudia Ortmann1, Karen Hans2, Thomas Oberbach3, Hannes Richter4 1,2,3Mathys Orthopaedie GmbH, Moersdorf, Germany 4Fraunhofer Institut IKTS, Hermsdorf, Germany |
Fabrication and Characterization of Functionally Graded CNTs/PMMA Microcellular Foams with Designed Cell Structure Lianmeng Zhang1, Ruizhi Zhang1, Guoqiang Luo1, Chun Gu1, Qiang Shen1, Meijuan Li1, Chuanbin Wang1, Jian Zhang1, Yuanlu Xiong2 1State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan, China 2International School of Materials Science and Engineering, Wuhan University of Technology, Wuhan, China |
| 15:20 – 15:45 | Applications of functionally graded materials in dentistry Júlio C. M. Souza1,2, Bruno Henriques2,3, Márcio C. Fredel3, Rubens M. Nascimento4, Filipe S. Silva2 1CEPID, Department of Dentistry (DODT), Universidade Federal de Santa Catarina (UFSC), Florianópolis/SC, Brazil 2Department of Mechanical Engineering (DEM), Campus Azurém, Guimarães, Portugal 3Department of Mechanical Engineering, Universidade Federal de Santa Catarina (UFSC), Florianópolis/SC, Brazil 4Department of Materials Engineering, Universidade Federal do Rio Grande do Norte (UFRN), Natal/RN, Brazil |
Multifunctional polymer composites and ordered nanostructures of photochromic molecular magnets: synthesis and properties Nataliya A. Sanina Institute of Problems of Chemical Physics, Russian Academy of Sciences, Moscow region, Russian Federation |
| 15:45 – 16:15 | Coffee break | |
| 16:15 – 16:40 | In-vitro biocompatibility of Ti-implants with compositionally graded coatings Andreas Rosin1, Elke Rieß2, Monika Willert-Porada1 1Chair of Materials Processing, University of Bayreuth, Bayreuth, Germany 2FKI GmbH, Ahorntal, Germany |
Plastic wave propagation velocity in graded metallic foam materials M. Borovinšek1, F. Schleifer2, Z. Ren1 1University of Maribor, Faculty of Mechanical Engineering, Slovenia 2University of Bayreuth, Germany |
| 16:40 – 17:05 | FEM and analytical analysis of the bending stress distribution in graded zirconia-based dental ceramics Bruno Henriques1,2, Douglas Fabris1, Julio C.M. Souza3, Joana Mesquita-Guimarães1, Yu Zhang4, Márcio Fredel1, Filipe Silva2 1Ceramic and Composite Materials Research Group (CERMAT), Federal University of Santa Catarina (UFSC), Campus Trindade, Florianópolis/SC, Brazil 2CMEMS-UMinho, University of Minho, Campus de Azurém, Guimarães, Portugal 3CEPID, Department of Dentistry (DODT), Universidade Federal de Santa Catarina(UFSC), Florianópolis/SC, Brazil 4Department of Biomaterials and Biomimetics, New York University College of Dentistry, New York University, New York, USA |
Low Velocity Impact Performance of Honeycomb Sandwich Structures Reinforced by Functionally Graded Face Plates Kemal Arslan1, Recep Gunes2, M. Kemal Apalak3, J.N. Reddy4 1Graduate School of Natural and Applied Sciences, Erciyes University, Turkey 2,3Department of Mechanical Engineering, Erciyes University, Turkey 4Department of Mechanical Engineering, Texas A&M University, USA
|
| 17:05 – 17:30 | Oral Poster presentations | |
| 17:30 – 21:30 | Bavarian Evening & Poster Session Opening | |
Tuesday, September 20th, 2016 |
||
| 9:00 – 9:45 Plenary lecture III Venue: H 36 |
From open-cellular materials to mechanical metamaterials by structural design and 3D-printing Carolin Körner Chair of Materials Science and Engineering for Metals, University of Erlangen-Nuremberg, Nuremberg, Germany Chair: Akira Kawasaki |
|
| 9:45 – 10:15 | Coffee break | |
| Industrial Exhibition | ||
| 10:15 – 11:00 Plenary lecture IV Venue: H 36 |
Multifunctional graded surfaces for osseointegrated implants: Combining tribocorrosion resistance with bone cells activity L. A. Rocha1,2, F. G. Oliveira2,3, A. R. Ribeiro2,4 1UNESP – Universidade Estadual Paulista, Fac. Ciências Bauru, Brazil 2IBTN/Br – Brazilian Branch of the Institute of Biomaterials, Tribocorrosion and Nanomedicine, Brazil 3CITEVE – Centro Tecnológico Indústria Têxtil e Vestuário, Vila Nova de Famalicão, Portugal 4National Institute of Metrology Quality and Technology, Directory of Metrology Applied to Health Sciences, Rio de Janeiro, Brazil Chair: Akira Kawasaki |
|
| Manufacturing and Properties Assessment of Functionally Graded Materials and Structures II Venue: S 130 Session Chair: Yoshimi Watanabe |
Testing of Functionally Graded Structures and Materials I Venue: S 135 Session Chair: Bruno Henriques |
|
| 11:05 – 11:30 | Stereolithographic Additive Manufacturing of Geometric Micro Patterns in Bulky Metal and Ceramic Components Soshu Kirihra Osaka University, Osaka, Japan |
Microstructural Characterization of Mg/Al Diffusion Bonded Joint Using Al-Ni Interlayer Jian Zhang, Guoqiang Luo, Qiang Shen, Lianmeng Zhang State Key Lab of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan, China |
| 11:30 – 11:55 | Challenge for Additive Manufacturing of Functionally Graded Materials Parts Jean-Yves Hascoët, Matthieu Rauch Ecole Centrale de Nantes, France |
Hot corrosion behavior of 8Y-ZrO2/ZrSiO4 ceramic sealed by Laser-assisted Microwave Plasma Processing Christian Richter, Monika Willert-Porada Chair of Materials Processing, University of Bayreuth, Bayreuth, Germany |
| 11:55 – 12:20 | Microstructure and Wear Property of Al-Al3Ti FGMs Fabricated by Centrifugal Solid-Particle and in-situ Methods Yoshimi Watanabe, Qi Zhou, Hisashi Sato Nagoya Institute of Technology, Nagoya, Japan |
Measurement of Young’s Modulus at Elevated Temperatures of Thermal Barrier Coating by Bending Resonance Method Satoru Takahashi1, Kazuki Ookubo2, Hiroyuki Waki3, Masahiko Kato4, Syusui Ogawa5, Fumio Ono6 1,2Tokyo Metropolitan University, Tokyo, Japan 3Iwate University, Japan 4Hiroshima University, Hiroshima, Japan 5Japan Fine Ceramics Center 6Osaka Science & Technology Center, Osaka, Japan |
| 12:20 – 12:45 | Hierarchical Structured Intermetallic Alloys Produced by Centrifugal SHS-Casting Technology V. N. Sanin1, D. M. Ikornikov1, D. E. Andreev1, V. I. Yukhvid1, E. A. Levashov2, Zh. A. Sentyurina2, A. A. Zaitsev2, Yu. S. Pogozhev2 1Institute of Structural Macrokinetics and Materials Science, Russian Academy of Sciences, Chernogolovka, Moscow, Russia 2National University of Science and Technology MISiS, Moscow, Russia |
Development of measurement system of thermoelectric properties of thin films in the thickness direction Yoshikazu Shinohara1, Hiroshi Kawakami2, Yukihiro Isoda1 1National Institute for Materials Science (NIMS), Japan 2New Energy and Industrial Technology Development Organization (NEDO), Japan |
| 12:45 – 13:45 | Lunch break | |
| Industrial Exhibition | ||
| 13:45 – 14:30 Plenary lecture V Venue: H 36 |
Self-Folding Structures By Programming Gradients in Polymer Sheets: Theory and Practice Christian Santangelo Department of Physics, University of Massachusetts Amherst, USA Chair: Akira Kawasaki |
|
| Functionally Graded Amorphous and Semi-Crystalline Materials Venue: S 130 Session Chair: Aldo R. Boccaccini |
Modelling of Functionally Graded Materials and Structures II Venue: S 135 Session Chair: Christian Santangelo |
|
| 14:35 – 15:10 | Gradient-Index Micro-Optics by Ion Exchange in Glass and its Applications to Optical Metrology and Biophotonic Imaging (Keynote) Bernhard Messerschmidt, Sandra Gerlach GRINTECH GmbH, Jena, Germany |
FGM Thermal Barrier Coatings Optimization under Hot Burner Testing Conditions (Keynote) Michael Gasik1, Akira Kawasaki2 1Aalto University Foundation, Finland 2Tohoku University, Graduate School of Engineering, Sendai, Japan |
| 15:10 – 15:35 | Confocal chromatic sensor systems based on gradient index optics Alexander Streicher Micro-Epsilon Messtechnik GmbH & Co. KG, Ortenburg, Germany |
Stress wave propagation in a functionally graded cylinder M. Kemal Apalak1 Mehmet Dorduncu2 1Department of Mechanical Engineering, Erciyes University, Kayseri, Turkey, 2Department of Aerospace and Mechanical Engineering, The University of Arizona, Tucson, USA |
| 15:35 – 16:00 | Compositionally graded glass by microwave field assisted ion exchange T. Gerdes1,2, A. Schmid-Rodenkirchen2, H.S. Park1, B. Scharfe3, M. Willert-Porada1,3 1Chair of Materials Processing, University of Bayreuth, Bayreuth, Germany 2InVerTec eV, Bayreuth, Germany 3Technologie-Anwenderzentrum Spiegelau, Spiegelau, Germany |
Nonlinear Dynamic of Imperfect FGM Shallow Shell with Time Dependent Parameters in Temperature Field Fatieieva Yu Department of Applied Mathematics and Mechanics, Zaporizhzhe National University, Zaporizhzhe, Ukraine |
| 16:00 – 16:25 | Glassceramics with graded photocatalytic activity D. Leykam, A. Rosin, T. Gerdes, M. Willert-Porada Chair of Materials Processing, University of Bayreuth, Bayreuth, Germany |
Elastoplastic analysis of axially loaded FGM box section column S. Burzynski, J. Chroscielewski, K. Daszkiewicz, W. Witkowski Gdansk University of Technology, Department of Mechanics of Materials, Gdansk, Poland |
| 16.25 – 16:45 | Coffee break | |
| Industrial Exhibition | ||
| 16:45 – 17:30 Plenary lecture VI Venue: H 36 |
Functionally Graded Materials in Biomedical Applications: Progress and Challenges Liliana Liverani, Aldo R. Boccaccini Institute of Biomaterials, University of Erlangen-Nuremberg, Germany Chair: Akira Kawasaki |
|
| 19:00 – 22:00 | Conference Dinner at Eremitage Restaurant | |
Wednesday, September 21th, 2016 |
||
| 9:00 – 9:45 Plenary lecture VII Venue: H 36 |
3D Printing of Drug and Material Gradients in Bioceramic Implants S. Meininger, E. Vorndran, U. Gbureck Department for Functional Materials in Medicine and Dentistry, University Hospital Würzburg, Germany Chair: Michael Gasik |
|
| 9:45 – 10:15 | Coffee break | |
| Manufacturing and Properties Assessment of Functionally Graded Materials and Structures III Venue: S 130 Session Chair: Luís Augusto Rocha |
Structure Dominated Biomaterials II Venue: S 135 Session Chair: Gregor Lang |
|
| 10:15 – 10:40 | Research on FGM for Nuclear Applications Chang-Chun Ge, Xiaona Ren, Qing-Zhi Yan, Ying-Chun Zhang, Zhang-Jian Zhou, Min Xia Institute of Nuclear Materials (INM), University of Science and Technology Beijing (USTB), Beijing, China |
Recombinant spider silk proteins as bioinks Elise DeSimone1, Kristin Schacht1, Jürgen Groll2, Thomas Scheibel1 1Department of Biomaterials, University of Bayreuth, Bayreuth, Germany 2Department for Functional Materials in Medicine and Dentistry, University Hospital Würzburg, Germany |
| 10:40 – 11:05 | Experimental Investigation of Microstructural and Micromechanical Properties of Fe/B4C-Fe/B Functionally Graded Materials Mustafa Hamamci1, Fehmi Nair1, A. Alper Cerit2 1Composite Research Laboratory, Department of Mechanical Engineering, Erciyes University, Kayseri, Turkey 2Department of Industrial Design Engineering, Erciyes University, Kayseri, Turkey |
Collagen-based gradient materials for tendon replacement Christian Haynl and Thomas Scheibel Department of Biomaterials, University of Bayreuth, Bayreuth, Germany |
| 11:05 – 11:30 | Friction and Wear Characteristics of MoS2/Cu-Sn Composite Film Hitoshi Kohri, Takayoshi Yagasaki School of Advanced Engineering, Kogakuin University, Japan |
Mechanical Testing of Engineered Spider Silk Filaments Provides Insights into Molecular Features on a Meso-Scale Gregor Lang1,2, Benedikt R. Neugirg3, Daniel Kluge3 , Andreas Fery4 and Thomas Scheibel1 1Department of Biomaterials, University of Bayreuth, Bayreuth, Germany 2Professorship for Biopolymer Processing, University of Bayreuth, Bayreuth, Germany 3Department of Physical Chemistry II, University of Bayreuth, Bayreuth, Germany 4Chair for Physical Chemistry of Polymeric Materials, Technical University Dresden, Dresden, Germany |
| 11:30 – 11:55 | Functionally Graded Cu ZnS Phosphor and its Applications Jehong Park1, Seungchan Cho2, Akira Kawasaki3, Kwangjae Park4, Kwonhoo Kim4, Hansang Kwon1,4 1Next-Generation Materials Co., Ltd.(NGM), South Korea 2Korea Institute of Materials Science, South Korea 3Tohoku University, Japan 4Pukyong National University, South Korea |
Study on the functionally graded characteristics of biofilms Makoto Miyaoka, Kouichi Nakano, Toshinari Maeda Graduate School of life Science and Systems Engineering, Kyushu Institute of Technology, Japan |
| 11:55 – 12:20 | Electrospark Deposited FGMs Coatings with Enhanced Characteristics E. Levashov, E. Zamulaeva, N. Litovchenko, A. Potanin, D. Shtansky National University of Science and Technology “MISiS”, Moscow, Russia |
Decomposition and Recovery Technology of Multi-Function Type Print Circuit Board with Substrate a Biodegradable Resin Arashi Ohmukai1, Takayoshi Yagasaki2, Hitoshi Kohri3, Ichiro Takano4 1Graduate school, Kogakuin University, Japan 2,3School of Advanced Engineering, Kogakuin University, Japan 4Faculty of Engineering, Kogakuin University, Japan |
| 12:20 – 13:30 | Lunch break | |
| 13:30 – 14:05 Venue: H 36 |
Electromagnetic induced segregation of aluminum alloy cast parts (Keynote) Bernard Nacke Institute of Electrotechnology, Leibniz Universität Hannover, Germany Chair: Michael Gasik |
|
| Manufacturing and Properties Assessment of Functionally Graded Materials and Structures IV Venue: S 130 Session Chair: Carolin Körner |
Performance Verification of Functionally Graded Materials and Structures Venue: S 130 Session Chair: M. Kemal Apalak |
|
| 14:10 – 14:35 | Synthesis and Mechanical Properties of Graded TC4 Titanium Alloy via Plasma Activated Sintering Yi Sun, Guoqiang Luo, Chuandong Wu, Jianian Hu, Jian Zhang, Meijuan Li, Qiang Shen, Lianmeng Zhang, Rhuizi Zhang State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan, China |
Effect of Number of Layers on the Ballistics Performance of Functionally Graded Sandwich Plates M. Aydin1, M. K. Apalak2, Z. G. Apalak3 1,3Department of Aeronautical Engineering, Erciyes University, Kayseri, Turkey 2Department of Mechanical Engineering, Erciyes University, Kayseri, Turkey |
| 14:35 – 15:00 | Innovative Preparation of Nano-sized WC/W2C/W Functionally Graded Material (FGM) Xiaona Ren, Min Xia, Qingzhi Yan, Changchun Ge Institute of Nuclear Energy and New Energy System Materials, School of Materials Sciences and Engineering, University of Science and Technology Beijing (USTB) |
High pressure injection valve with magnetic gradient Stefan Oetinger1, Ralf Moos2, Monika Willert-Porada3 1Bosch GmbH, Germany 2Chair of Functional Materials, University of Bayreuth, Bayreuth, Germany 3Chair of Materials Processing, University of Bayreuth, Bayreuth, Germany |
| 15:00 – 16:00 Venue: H 36 |
Panel discussion & closing ceremony (Introduction of next conference venue) | |
| 16:00 | Farewell barbecue | |